Visitez notre section de produits en promotions pour des rabais importants!
KINGSTON 8GB 1866MHZ DDR3 CL10 DIMM HYPERX FURY BLACK SERIES
Appuyer et déplacer pour zoomer
Passer en survol l'image pour zoomer

KINGSTON 8GB 1866MHZ DDR3 CL10 DIMM HYPERX FURY BLACK SERIES

Code de produit : 104866 (HX318C10FB/8)

Code UPC :740617230567

HyperX HX318C10FB/8 is a 1G x 64-bit (8GB) DDR3-1866
CL10 SDRAM (Synchronous DRAM) 2Rx8 memory module,
based on sixteen 512M x 8-bit DDR3 FBGA components. This
module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below. FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 933MHz fCK for 1866Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• Height 1.291” (32.80mm) w/heatsink, double sided
component